ShopTalk gears.gif (7834 bytes)

Because these pages may move to other servers from time to time, we have put this information on our server for all to view. If you are the original author, and you have a problem with that, please contact us and we will remove this page.
Please checkout the "Original Authors" web page.

 Custom Valk lift

lift 1.jpg (77746 bytes)

Valk on its way to the top.

lift 2.jpg (75529 bytes)

Full lift.  It's actually more stable at higher lift.    But stable al all levels.

lift high.jpg (68706 bytes)

Easy to clean.

lift5.jpg (34102 bytes)

Some modifications form the original design.

lift6.jpg (33212 bytes) lift7.jpg (44708 bytes)

The original design had the plate with the stub shaft welded across the bottom. but in an effort to get this system to work on my Interstate, I had to weld the plate flush with the bottom and cut the stub shaft shorter. my bike must be lower than a Standard Valkyrie or my jack is taller than most. But this works fine the way it is and is very stable. It makes cleaning the wheels a breeze! Also keeps the bike upright and stable when I work on it.  F6Rider Webzine    ShopTalk    Just Pics    Valkyrie Hot Links