ShopTalk gears.gif (7834 bytes)

  • Title Page- Crankcase Breather
  • Original Author- Carl Kulow

Because these pages may move to other servers from time to time, we have put this information on our server for all to view. If you are the original author, and you have a problem with that, please contact us and we will remove this page.

Crankcase Breather

Parts                                                                                       Tools

none                                                                                        slip joint pliers



1.      Locate the 3 drain hoses below the right foot peg

2.      Note that one of the hoses has a plug and clamp on the end of it

3.      Squeeze the clamp with the pliers to open it slightly and slide the clamp up the hose ~1 inch

4.      Pull the plug from the hose and let it drain into an old can

5.      Install the plug

6.      Slide the clamp back down over the plug using the pliers

The author has done his best to produce accurate information
however; neither he nor the editor nor the web publisher can assume
liability for any damage or injury caused by any errors or omissions in this manual
Use good sense and at your own risk!

ISBN F6-1520CC

First Edition Copyright:  1997-2001 All Valkyrie Riders

Send comments/corrections to

Carl Kulow   Message Board    ShopTalk    Just Pics    Valkyrie Hot Links